Onkyo TX-SR494+Crystal4 Set 4.3 4.1 4.C WH-S10E (walnut)

Onkyo TX-SR494

160 watts per channel

Supports 4K/60p and HDR (HDR10, HLG, Dolby Vision®, BT.2020)

5.2.2-ch Dolby Atmos® and DTS:X® playback

Dolby Atmos Height Virtualizer* and DTS Virtual:X™

AccuEQ with subwoofer EQ and AccuReflex™

Discrete high-current amp system with 4-ohm drive capability

Bluetooth® technology and Advanced Music Optimizer™

Vocal Enhancer function improves voice audibilityZone B pre-/line-out shares any audio source to components with an RCA input, such as wireless headphone docks, etc.

OSD window shows media format data for quick confirmation

 

Crystal 4.3

General description Bookshelf Speaker

Enclosure type Bass Reflex

Transducer complement 3-way

Bass driver 165mm Polypropylene Cone

Midrange driver 125mm Woven Kevlar Cone

Treble driver 25mm Soft Dome

Sensitivity (2.83V @ 1m) 88dB

Recommended amplifier power 25-120W

Peak SPL 96dB

Nominal impedance 8Ω Compatible

Minimum impedance 3.7Ω

Frequency response (+/-3dB) 50Hz - 20kHz

Bass extension (-6dB) 45Hz

Crossover frequency 500Hz & 2kHz

Cabinet Volume (in litres) 7.5L&21L

Dimensions (mm)

Height (on plinth) (900+22)mm

Width 205mm

 

Crystal 4.1

General description Bookshelf Speaker

Enclosure type Bass Reflex

Transducer complement 2-way

Bass driver 100mm Woven Kevlar Cone

Treble driver 25mm Soft Dome

Sensitivity (2.83V @ 1m) 86dB

Recommended amplifier power 20-60W

Peak SPL 95dB

Nominal impedance 8Ω Compatible

Minimum impedance 4.3Ω

Frequency response (+/-3dB) 75Hz - 20kHz

Bass extension (-6dB) 70Hz

Crossover frequency 3.4kHz

Cabinet Volume (in litres) 2.3L

Dimensions (mm)

Height 194mm

Width 141mm

Depth (with grille&terminal) (147+10)mm

Carton size 382 x 225 x 280mm

Net weight 2kg each

Finish  Walnut  

 

Crystal 4c

General description Centre Channel Speaker

Enclosure type Bass Reflex

Transducer complement 2-way

Bass driver 125mm Woven Kevlar Cone x 2

Treble driver 25mm Soft Dome

AV shield Yes

Sensitivity (2.83V @ 1m) 89dB

Recommended amplifier power 25-100W

Peak SPL 95dB

Nominal impedance 8Ω Compatible

Minimum impedance 4.2Ω

Frequency response (+/-3dB) 70Hz - 20kHz

Bass extension (-6dB) 65Hz

Crossover frequency 2.4kHz

Cabinet Volume (in litres) 8.2L

Dimensions (mm)

Height 172mm

Width 415mm

Depth (with grille & terminal) (192+10)mm

Carton size 495 x 280 x 260mm

Net weight 6.8kg each

Finish Walnut

 

WH-S10E

Description/Format    Active Dynamic-Drive IB subwoofer system

Drive Units    1 x 10" (250mm) cone long-throw

Frequency Response (+/-3dB)    35Hz - 150Hz

Amplifier Power Output    150W

Peak Power Output    300WLine Input Sensitivity    100mV for maximum output

Crossover Range    30Hz - 150Hz

Inputs    Stereo Line In (2 x RCA Phono)

Mono (LFE) Line In (RCA Phono)

Input Impedance    Line In 10kOhms

LFE 5kOhms

Signal-to-noise ratio    >85db

Avg. Max Output @1m    110dB

Features    Low pass filter slope adjustment

Phase inversion

Auto on/off

High pass output

Dimensions    363 (+30) x 333 x 372 (+22)

Net Weight    14kg

Gross Weight    16.5kg

Accessories    IEC power cord, spikes as standard